Slitting

Slitting

Precision Foil Slitting Services

All Foils specializes in providing precision slitting services for light-gauge metal foils. Depending on the application, a number of different slitting techniques may be required. As a Cleveland, Ohio converter with over 45 years of slitting experience, our team is ready to develop a slitting solution specifically for you. No matter the material, width or quantity, All Foils can slit it all!

As your full-service slitting provider, we customize our processing techniques to meet tight tolerance requirements up to +/- .005″, with .003″ available upon request. Each of our three slitting processes is engineered to eliminate distortion, improve edge consistency, reduce burrs and protect the integrity of your material.

All Foils is one of the only domestic light-gauge metal processors capable of slitting to widths as narrow as .093″, with capabilities up to 72″ and core sizes from 1 5/16″ to 20″. We slit foil for battery, capacitor, electronics, HVAC, packaging and aerospace applications. Need material cut to length or moved to a different core? Explore our sheeting services and material rewinding services.

Slitting Capabilities at a Glance

.0002″

MINIMUM GAUGE

.093″–72″

SLIT WIDTHS

±.003″

TOLERANCES AVAILABLE

1 5/16″–20″

CORE SIZES (ID)

Materials: aluminum, brass, carbon steel, copper, Inconel, metalized polyester, nickel, specialty metals and stainless steel, plus cloths, films and metalized papers

Slitting knives cutting thin-gauge aluminum foil

Ultra-Thin Gauge Slitting

Foil at .0002″ is extremely fragile and prone to tearing, wrinkling and edge distortion. At this thickness, even small inconsistencies in handling can compromise an entire roll, which is why many processors won’t take it on. Our experienced operators and specialized equipment are built for these challenges, so the entire roll stays on spec from the first lap to the last.

With more than 45 years of slitting experience, All Foils regularly processes ultra-thin aluminum, copper and nickel foils for demanding applications, including battery- and capacitor-grade foil in gauges from .0002″ to .001:. Every order is backed by our ISO 9001:2015 certified quality management system, giving you consistent widths, clean edges and repeatable quality from one run to the next.

Choosing the Right Slitting Process

The right slitting method depends on your material, gauge and end-use requirements. All Foils offers three slitting processes, each engineered to eliminate distortion, improve edge consistency, reduce burrs and protect the integrity of your material. Our team will recommend the best fit for your application.

Razor Slitting

Best suited for thin, light-gauge foils and films, where a sharp, fixed razor blade produces a clean cut at high speed with minimal stress on even the most delicate material.

Rotary Slitting

Best suited for heavier gauges and harder metals, where precision-ground upper and lower circular knives shear the material for the cleanest edges, minimal burrs and tight width tolerances.

Solid Knife Slitting

Best suited for laminated, coated and adhesive-backed materials, such as metal tape, where a hardened knife pressed against an anvil roll splits multi-layer constructions.

Foil Slitting FAQs

What’s the narrowest width you can slit?

All Foils slits light-gauge metal foils to widths as narrow as .093″, one of the few domestic processors with that capability.

How thin a foil can you slit?

We slit gauges down to .0002″, using equipment and operators specialized for ultra-thin material.

What tolerances can you hold?

Standard slitting tolerance is ±.005″, with ±.003″ available upon request.

What materials can you slit?

We slit aluminum, brass, carbon steel, copper, Inconel, metalized polyester, nickel, stainless steel and specialty metals, as well as cloths, films and metalized papers.

What core sizes do you offer?

Core sizes range from 1 5/16″ to 20″ inner diameter.